Category Archives: Computers

Additional Steps Installing Ubuntu 10.10 Maverick

Here are some additional things either installing custom software or specific configuration options used in setting up my new system.

A few settings I set with Compiz setup.

  1. I use shutter for a screenshot utility and this will allow it to replace the default gnome-screenshot tool allowing more flexibility and control. I especially like the section and web screenshot options where I can take a shot of the entire contents of a window without any of the controls or of an entire web page without having to stitch them together.Open up the Settings Manager and in Gnome Compatibility on the Commands tab I replace ‘gnome-screenshot’ with ‘shutter –full’ and ‘gnome-screenshot –window’ with ‘shutter –section’ in the first two entries.

    Edit: be sure to have synapse 0.87 installed

    sudo add-apt-repository ppa:shutter/ppa
    sudo apt-get update && sudo apt-get install shutter

I chose to install synapse over gnome-do my usual default launcher, Synapse just seemed like a little more fun this time around.

sudo add-apt-repository ppa:synapse-core/ppa
sudo apt-get update && sudo apt-get install synapse

Some other software I installed as I realized it.

sudo apt-get install libqt4-network libqt4-opengl
sudo dpkg -i virtualbox-4.0_4.0.2-69518~Ubuntu~maverick_i386.deb

sudo apt-get install apache2 mysql-client mysql-server php5 libapache2-mod-php5
sudo apt-get install banshee
sudo apt-get install subversion
sudo apt-get install sshfs

Ubuntu + Boxee

Who needs cable when you’ve got Boxee? I sure don’t, well except for watching some hockey. I love NHL Gamecentre, if only it played local games (well it can but not if they can help it). More on that at a later time, this is about my basic Boxee setup.

I’m going with Ubuntu 10.04 on this setup, I’ve played with 10.10 and had some troubles with it and a few things relating to boxee and my remote, I already had 10.04 installed on other boxee systems so this seemed like a good fit.


I’m going with a Zotac Mag that I picked up at Ncix for pretty cheap on a boxing day sale. It’s got HDMI out and runs pretty cool and quiet. It also conveniently mounts to the back of your tv if you haven’t already mounted on to the wall which makes it nice and out of the way. For a remote I’m using a standard Windows Media Center remote circa 2005.

The Zotac doesn’t come pre-installed with any OS on it and there is no optical drives of any sort so you must boot from a USB disk. I have gone and used the Startup Disk Creator in Ubuntu to create a boot disk of Ubuntu 10.04.1 iso, pretty standard follow the instructions.

The Zotac boots from hard disk by default so be sure to press the delete key until you get the bios, set it to boot from the USB and Save & Exit. Because I used the 10.10 disk creator (that’s what I have running on my laptop) with a 10.04 iso there is a bug that doesn’t allow the usb disk to book correctly with the error message “vesamenu.c32: not a com32r image”. All I did was type help at the prompt which sent me to the help screen and then hit enter and it continued along it’s merry little way.


With the live version of the OS up and running just hit the install to disk button and follow the prompts, this should all be pretty self-explanatory. I chose to let Ubuntu use the whole disk as it likes rather than partition it up myself.

With the OS installed a quick sudo apt-get update && sudo apt-get upgrade to get up to date and then I also installed the Restricted Drivers from Nvidia.

I can then download and install the boxee software itself by downloading the latest version from – at the time of writing it was for 32bit Ubuntu Linux. Just open the file it will open up in the Ubuntu Software Center and you are good to go.


First problem I ran into was the sound. Boxee booted up and it didn’t have the typical startup sounds. Because I’m using HDMI I realized I had to enabled the digital output in the System > Preferences > Sound menu on the Hardware tab. This wasn’t quite enough though, it turns out that alsa defaults to muting the Digital outputs. Just run the following in a terminal and use the mouse cursor to scroll over to the digital outputs, press the M key on each of them to unmute the digital outputs and you are good to go.


Next up, I tried out my remote and nothing. Right, I need to install lirc. You can find that in the System > Administration > Synaptic Package Manger or with a:

sudo apt-get install lirc

This will install lirc and then ask you a couple questions, first page you will scroll down and pick your remote. The second page I chose ‘None’ for the IR receiver as I’m not using one and that was it. Remote is now working again.

Now that the remote is working I wanted it to suspend the entire system when I pressed the power button.

Copy keymap file to your home dir.

cp /opt/boxee/system/keymaps/remote.xml ~/.boxee/UserData/keymaps/

and change XBMC.Shutdown() to XBMC.Suspend(). I found this on line 64 at the time of writing. I also updated line 68 XBMC.ActivateWindow(Home) to XBMC.ActivateWindow(10481) which allowed the MyTV button to load the TV page instead of going to the home screen.

Below is my Lircmap.xml file that I used for my MCE Remote

<remote device="mceusb">

In System > Preferences > Power Management turn off the display power down by setting it to Never. Be sure kernel is > 2.6.32-24 as there is a bug in 2.6.32-23 that does not allow to wake from the usb remote correctly.

The remote wasn’t working to wake, you need to enable a USB device to wake the computer. Here is a link suggesting how to find the correct device and set it, you need to try each of the USB devices listed until you find the right one, rebooting between each attempt.

Disable screen lock in gconf-editor to prevent asking for password when resuming from suspend:

gconftool-2 --type boolean -s /desktop/gnome/lockdown/disable_lock_screen true

(for some reason if you use app indicator it sill locks no matter which setting is used

Custom Look

Just for fun I decided to make the desktop look as clean and simple as possible and somewhat boxee-esqe. I set the toolbars on top and bottom to auto-hide. Just right-click on each, select Properties… and check Auto-Hide.

I then removed all desktop icons as you can see from and then I set wallpaper to use the boxee wallpaper which I found in here: /opt/boxee/skin/boxee/media/background

Add boxee to startup apps in System > Preferences > Startup Applications and Adding a new app with the command: /opt/boxee/run-boxee-desktop. This should automatically run boxee everytime you boot up your computer.

That’s about it! A nice clean simple custom boxee box that runs through HDMI with a remote and properly suspends. In a later post I’ll describe my setup for automated tv show downloads using transmission-daemon and tvnamer and perhaps some vpn magic to gain access to content you can’t normally view.

First Steps Installing Ubuntu 10.10 Maverick on a Dell Inpspiron

I got myself a new Dell Inspiron n series today and thought it would be a good idea to outline for myself everything that I do to get it up to where I was happy with it so that I can remember what exactly I did.

It came with Ubuntu 9.10 installed on it, so the first thing that I did was to upgrade it up to 10.10. A simple update-manager -d will do the trick here.

sudo update-manager -d

I then enabled all the additional repos and set my download location to Canada via the Ubuntu Software Centre and ran a full update.

sudo apt-get update && sudo apt-get upgrade

Restricted Extras

Firstly I installed the restricted extras to get all the codecs, flash, fonts, etc..

sudo apt-get install ubuntu-restricted-extras

Then I added the medibuntu repos.

sudo wget$(lsb_release -cs).list --output-document=/etc/apt/sources.list.d/medibuntu.list
sudo apt-get update && sudo apt-get install medibuntu-keyring && sudo apt-get update
sudo apt-get upgrade
sudo apt-get install non-free-codecs
sudo apt-get install libdvdcss2 gxine libxine1-ffmpeg vlc mplayer mencoder

Ubuntu One

I connected my Ubuntu One account to synchronize my documents followed by opening up Tomboy and setting it’s synchronizations to use Ubuntu One as well.


Download and install dropbox:

Default Apps

Here is a list of the initial default apps that I typically use:

sudo apt-get install gimp hamster-applet audacity avidemux devede easytag soundconverter meld epiphany-browser chromium-browser gcolor2 inkscape shutter

And some command line tools that I typically use:

sudo apt-get install vim exuberant-ctags ncftp mc lynx curl build-essential ec2-api-tools


Install the compiz settings manager

sudo apt-get install compizconfig-settings-manager

Google Chrome

Download and install Google Chrome:

Other Notes:

I had to enter the bios and flip the function key settings as Dell defaults the F keys to be media keys and to use them as standard function keys you need to hit the function button, I more frequently use the regular function keys so I needed this changed.

I’m having trouble setting up the synaptics touchpad to allow for edge scrolling, I can’t seem to find any answer to solve this as of yet I’ll write an update when I track down the answer.